Forester F4-2.5L Turbo (2009)
Fuel Level Sensor: Service and Repair
Fuel Sub Level Sensor
Fuel Sub Level Sensor
REMOVAL
WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
-
Be careful not to spill fuel.
-
When the fuel meter indication is higher than two third of the total, perform the work after draining the fuel not to spill the fuel.
1. Release the fuel pressure.
2. Drain fuel.
3. Disconnect the ground cable from battery.
4. Remove the rear seat cushion.
5. Remove the service hole cover.
6. Disconnect the connector from the fuel sub level sensor.
7. Disconnect the quick connector, then disconnect the fuel delivery tube, fuel return tube, and jet pump tube.
8. Remove the nuts and bolts which install fuel sub level sensor on fuel tank.