Forester F4-2.5L Turbo (2009)
3) Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020) or equivalent
4) Fill the 3 locations of the transmission case excluding the bolt holes with an ample amount of liquid gasket.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020) or equivalent
5) Install the oil pan by equally tightening the bolts.
Tightening torque: 5 N-m (0.5 kgf-m, 3.7 ft-lb)
6) Install the front vehicle speed sensor and torque converter turbine speed sensor.
Tightening torque: 7 N-m (0.7 kgf-m, 5.2 ft-lb)
7) Connect the connector to the rear vehicle speed sensor.
8) Install the ATF inlet and outlet pipes.
NOTE:
Use a new copper washer.
Tightening torque:
T1: 25 N-m (2.5 kgf-m, 18.4 ft-lb)
T2: 40 N-m (4.1 kgf-m, 29.5 ft-lb)
T3: 45 N-m (4.6 kgf-m, 33.2 ft-lb)
