Forester F4-2.5L Turbo (2009)
5. Use the following procedures to remove the ball bearings.
1. Remove the bolt, and then detach the bearing retainer.
2. Firmly attach an appropriate tool (such as a correct size socket wrench) to the bearing inner race.
3. Use the press to push the ball bearings out from the front cover.
6. Using the bearing puller, remove the bearings from the rotor.
7. Disconnect the connection between the rectifier and stator coil, then remove the stator coil.
CAUTION: The rectifier is easily damaged by heat. Do not allow a 180 - 270 W soldering iron to contact the terminals for 5 seconds or
more at a time.
