Forester F4-2.5L Turbo (2009)
3) Make sure that engine does not start with clutch pedal not depressed. If the engine starts, adjust the clutch switch and inspect the clutch start
circuit.
4) Make sure that engine starts with clutch pedal fully depressed. If the engine does not start, adjust the clutch switch and inspect the clutch start
circuit.
ADJUSTMENT
1) Loosen the lock nut of clutch switch (clutch start).
2) Fully depress the clutch and hold it.
3) Adjust the gap of the clutch pedal plate and the clutch switch to be 3.1 - 4.1 mm (0.12 - 0.16 in).
4) Tighten the lock nut.
Tightening torque:
8 N-m (0.8 kgf-m, 5.9 ft-lb)