Forester F4-2.5L Turbo (2009)
Starter Motor: Overhaul
Starter
DISASSEMBLY
1. Loosen the nuts fastening the magnet switch assembly M terminal, then disconnect the harness from the terminal.
2. Remove the screws fastening the magnet switch assembly, then remove the magnet switch assembly from the starter housing assembly.
3. Remove screws (A) of the brush holder assembly, and through bolts (B) on both sides, and remove the starter cover assembly.
4. Remove the brush holder assembly from the armature assembly.
NOTE: Hold the brush with your fingers so that the brush spring does not come flying out.
5. Remove the armature assembly and yoke assembly from the starter housing assembly together as a single unit.