Forester F4-2.5L Turbo (2009)
8. Attach the armature assembly and yoke assembly to the starter housing assembly together as a single unit.
NOTE: As shown in the figure, match the protrusion of the yoke assembly to the cut out of the starter housing assembly.
9. Use an appropriate tool (such as correctly sized socket wrenches) and attach the brush holder assembly to the armature assembly.
NOTE: Be careful not to damage the brushes.
10. Attach the starter cover assembly, and affix to the brush holder assembly with screws (A).
Tightening torque: 1.4 N.m (0.1 kgf.m, 1.0 ft.lb)
11. Tighten through bolts (B) on both sides.
