Forester F4-2.5L Turbo (2009)
2) Deflection of the pulley groove
Service limit:
1.0 mm (0.039 in) or less
NOTE:
Read the value for one surface of V ditch, and then the value for another off the dial gauge.
3) Rotating resistance of pulley
Service limit:
Maximum load:
9.22 N (0.94 kgf, 2.07 lbf) or less
NOTE:
^
A rather higher value maybe indicated when pulley starts turning.
^
Measure the load during rotation to make a judgement.
HYDRAULIC PRESSURE
NOTE:
^
To measure hydraulic pressure correctly, be sure to complete all the items in "INSPECTION", prior to performing the measurement.
^
Do not leave the valve of pressure gauge closed or hold the steering wheel at lock for 5 seconds or more in any case, this can damage the oil
pump.
^
Before attaching a pressure gauge, place cloth at locations where fluid is expected to spill. Wipe off any spilt fluid completely after the