Forester F4-2.5L Turbo (2009)
9) Remove the front arm support plate.
10) Remove the bolt securing front arm to crossmember and pull the front arm out of the crossmember.
11) To remove the stud bolt, use the ST.
ST 20299AG020 STUD BOLT SOCKET
CAUTION:
Do not remove the stud bolt without necessity. Always replace the parts with new parts when removed.
Installation
INSTALLATION
1) Using the ST, install the stud bolt.
ST 20299AG020 STUD BOLT SOCKET
Tightening torque:
110 N-m (11.2 kgf-m, 8 1.1 ft-lb)
2) Using new bolts and self-locking nuts, temporarily tighten the front arm to crossmember.
3) Secure the front arm to body, and then install the support plate with new bolts and self-locking nuts.
Tightening torque:
Support plate to Front arm:
110 N-m (11.2 kgf-m, 81.1 ft-lb)