Forester F4-2.5L Turbo (2009)
^
Be careful not to damage the magnetic encoder.
8) Remove the front hub unit bearing. If it is hard to remove, use the ST.
ST1 926470000 AXLE SHAFT PULLER
ST2 28099PA110 AXLE SHAFT PULLER PLATE
Installation
INSTALLATION
1) Place the disc cover between housing and front hub unit, and tighten the four bolts.
Tightening torque:
65 N-m (6.6 kgf-m, 47.9 ft-lb)
2) Install the front drive shaft.
3) Tighten the axle nut temporarily.
4) Install the disc rotor to hub.
5) Install the disc brake caliper on the housing.
Tightening torque:
80 N-m (8.2 kgf-m, 59 ft-lb)
6) While depressing the brake pedal, tighten a new axle nut to the specified torque and lock it securely.
