Forester F4-2.5L Turbo (2009)
Installation
INSTALLATION
1) Aligning with the mounting hole of the rear brake back plate, temporarily tighten the rear hub unit bearing to the rear housing.
CAUTION:
^
Be careful not to damage the magnetic encoder.
^
Do not get closer the tool which charged magnetism to magnetic encoder.
2) Tighten the four bolts of the rear housing.
Tightening torque:
65 N-m (6.6 kgf-m, 47.9 ft-lb)
3) Tighten the new axle nut temporarily.
CAUTION:
Use new axle nuts.
4) Install the rear disc rotor.
5) Install the disc brake caliper to the rear housing.
Tightening torque:
66 N-m (6.7 kgf-m, 48.7 ft-lb)