Forester F4-2.5L Turbo (2009)
15) Remove the propeller shaft.
16) Place the transmission jack under the transmission.
NOTE:
Make sure that the support plate of transmission jack does not touch the cross.
17) Remove the transmission rear crossmember bolt.
18) Lower the transmission jack.
NOTE:
Do not separate the transmission jack and transmission.
19) Remove the ATF inlet and outlet pipes.
CAUTION:
When removing the outlet pipe, be careful not to lose the ball and spring used together with the retaining screw.
20) Remove the front vehicle speed sensor and torque converter turbine speed sensor.
21) Disconnect the connector from the rear vehicle speed sensor.
