Forester F4-2.5L Turbo (2009)
13) Remove the rod detent and spring detent from the bracket arm detent.
Assembly
ASSEMBLY
1) Clean all the parts before assembly.
2) Apply NIGTIGHT LYW No. 2 grease or equivalent to each part.
3) Assemble in the reverse order of disassembly.
NOTE:
^
When installing the plate guide COMPL, set the select lever to "D" range (normal mode position), and be careful of the following.
^
Insert protrusion (B) of the plate guide COMPL into the hole on the shift lock solenoid unit (A).
^
Insert link (D) of the shift lock release into link (C) of the shift lock solenoid unit.
