Forester F4-2.5L Turbo (2009)
NOTE:
The control valve body is replaced as an assembly only, because it is a non-disassembly part.
Installation
INSTALLATION
1) Check the control valve body for dust and other foreign matter.
2) Temporarily tighten the control valve body to the transmission.
3) Install the oil cooler pipe.
Tightening torque: 8 N-m (0.8 kgf-m, 5.9 ft-lb)
4) Tighten the bolts equally.
Tightening torque: 8 N-m (0.8 kgf-m, 5.9 ft-lb)
5) Connect the control valve connector.