Forester F4-2.5L Turbo (2009)
Drive/Propeller Shaft: Service and Repair
Installation
INSTALLATION
1) Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque:
52 N-m (5.3 kgf-m, 38.3 ft-lb)
2) Align the alignment marks and connect the flange yoke and rear differential.
Tightening torque:
31 N-m (3.2 kgf-m, 23.1 ft-lb)
3) Install the heat shield cover.
4) Install the center exhaust pipe.
5) Install the rear exhaust pipe and muffler.
6) Lower the vehicle.
7) Connect the ground cable to the battery.