Forester F4-2.5L Turbo (2009)
Axle Shaft Assembly: Overhaul
Front Drive Shaft Disassembly
DISASSEMBLY
1) Place alignment marks on the shaft and outer race.
2) Remove the PTJ boot band and boot.
CAUTION:
Be careful not to damage the boot.
3) Remove the snap ring from the PTJ outer race.
4) Remove the PTJ outer race from the shaft assembly.
5) Wipe off grease.
CAUTION:
The grease is a special type of grease. Do not mix with other grease.
6) Place alignment marks on the roller kit and trunnion.
