Forester F4-2.5L Turbo (2009)
9) Install the propeller shaft.
10) Install the heat shield cover.
11) Install the rear exhaust pipe and muffler.
12) Pour in the transmission gear oil and check the oil level.
Differential Side Retainer Oil Seal
REPLACEMENT
1) Lift up the vehicle.
2) Remove the differential gear oil drain plug using TORX(R) bit T70, and drain the differential gear oil completely.
3) Replace the gasket with a new part and tighten the differential gear oil drain plug using the TORX(R) bit T70.
Tightening torque:
44 N-m (4.5 kgf-m, 32.5 ft-lb) (Aluminum gasket)
70 N-m (7.1 kgf-m, 51.6 ft-lb) (Copper gasket)
