Forester F4-2.5L Turbo (2009)
Quarter Window Glass: Service and Repair
Rear Quarter Glass
REMOVAL
Remove the glass in the same procedures as for the windshield glass.
INSTALLATION
1. Process the cartridge nozzle tip as shown in the figure, and set the adhesive in the sealant gun.
2. Prepare and clean the adhesion surfaces of the glass and body using the same procedures as for the windshield glass.
3. Attach the fastener to the body.
4. Attach the outer dam rubber at a position 4 mm from the glass end.
5. On the front end, attach the inner periphery dam rubber at a position 13 mm from the border of the glass ceramic gradation, and for other locations
17 mm from the end of the glass.
