subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Cruise Control Servo|Description and Operation|Page 5734 > < Cruise Control Servo|Description and Operation|Page 5732
Page 3
background image

CHECK : Does cruise control cable have a stroke of 35 mm (1.38 in) within 3 seconds?
YES : Go to step 2D6.
NO : Replace actuator. Go to step 2D6.

2D6:

CHECK FOR LEAKAGE AND STICKING OF VALVES.
When the battery cable is disconnected from former condition , make sure the cable returns to its original position smoothly.

CHECK : Does cruise control cable get back to its original position within 1.5 seconds?
YES : Go to step 2D7.
NO : Replace actuator. Go to step 2D7.

2D7:

CHECK CABLE MOVEMENT.
Connect + (positive) battery cable to terminal No. 2 and - (negative) battery cable to terminals No.1, 3 and 4 of actuator connector.

CHECK : Does cruise control perform pull operation?
YES : Go to step 2D8.
NO : Replace actuator. Go to step 2D8.

2D8:

CHECK CABLE MOVEMENT.
Connect + (positive) battery cable to terminal No. 2 and - (negative) battery cable to terminals No.1 and 4 of actuator connector.

CHECK : Does cruise control perform hold operation?
YES : Go to step 2D9.
NO : Replace actuator. Go to step 2D9.

2D9:

CHECK CABLE MOVEMENT.
Connect + (positive) battery cable to terminal No. 2 and - (negative) battery cable to terminal No.4 of actuator connector.

Cruise Control Servo|Description and Operation|Page 5734 > < Cruise Control Servo|Description and Operation|Page 5732