Forester L F4-2.5L SOHC (1999)
covering) by its first letter and the stripe marking by its second letter.
^
The table lists the nominal sectional areas and allowable currents of the wires.
CAUTION: When replacing or repairing a wire, be sure to use the same size and type of the wire which was originally used.
NOTE:
^
The allowable current in the table indicates the tolerable amperage of each wire at an ambient temperature of 40° C (104° F).
^
The allowable current changes with ambient temperature. Also, it changes if a bundle of more than two wires is used.
^
Each unit is directly grounded to the body or indirectly grounds through a harness ground terminal. Different symbols are used in the wiring
diagram to identify the two grounding systems.
^
The ground points shown in the wiring diagram refer to the following:
NOTE: All wiring harnesses are provided with a ground point which should be securely connected.
^
Relays are classified as normally-open or normally-closed. The normally-closed relay has one or more contacts.