Forester S F4-2.5L DOHC (1998)
11. Finally check clearance between pipes and/or hoses, as shown.
If clearance between cruise control pump and power steering hose is less than 10 mm (0.39 inch), proceed as follows:
(1) Move clamped section (A) (refer to figure) down to a point where pipe is close to crossmember (pipe-to-crossmember clearance: 10 mm
(0.39 inch), min.).
(2) Check that clearance between cruise control pump and power steering hose is at least 10 mm (0.39 inch). If it is not, bend section (B)
down until a clearance of at least 10 mm (0.39 inch) is obtained.