Forester S F4-2.5L DOHC (1998)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION SENSOR
REMOVAL AND INSTALLATION
1) Disconnect battery ground cable.
2) Disconnect connector from camshaft position sensor.
3) Remove camshaft position sensor from camshaft support LH.
4) Installation is in the reverse order of removal.
Tightening torque: 6.4 ± 0.5 N.m (0.65 ± 0.05 kg-m, 4.7 ± 0.4 ft.lb)