Forester S F4-2.5L DOHC (1998)
Seat Belt: Service and Repair
Rear Seat Belt
Outer Belt
REMOVAL AND INSTALLATION
1. Remove These Parts
a. Rear Cushion And Side Pad.
b. Rear Backrest.
c. Rear Quarter Upper Trim And Rear Quarter Lower Trim.
d. Anchor Bolts.
e. Bolt And Nut And Then Detach Outer Belt Assembly.
2. Installation is in the reverse order of removal.
NOTE: Ensure that seat belt is properly reeled on and off after installation of ELR.
CAUTION:
-
Be extremely careful not to confuse center seat anchor plate with outer seat anchor plate during installation.
-
Ensure that seat belts are free from twisting after installation.
-
Ensure that tongues, buckles and belts are properly placed on seat.
Inner Belt and Center Belt
REMOVAL AND INSTALLATION
1. Remove rear cushion.
2. Remove bolts and then remove inner belt and center belt.
3. Installation is in the reverse order of removal.
