Forester S F4-2.5L DOHC (1998)
Connector & terminal
(P9)No. 2 (+) - No. 3 (-)
^
CHECK: Is the voltage 0.7 ± 0.2 V when G sensor is inclined backwards to 90° ?
^
Yes: G sensor is normal.
^
NO: Replace G sensor.
INSPECTION WITH SELECT MONITOR
15C1: CHECK G SENSOR
1) Turn ignition switch to OFF.
2) Connect select monitor connector to data link connector.
3) Turn select monitor into {ABS/TCS} mode.
4) Set the display in the {Current Data Display & Save} mode.
5) Read the G sensor output voltage.
^
CHECK: Is the indicated reading 2.3+0.2 V when the vehicle is in horizontal position?
^
YES: Go to step 15C2.
^
No: Replace G sensor
15C2: CHECK G SENSOR
1) Remove console box.
2) Remove G sensor from vehicle. (Do not disconnect connector.)