Forester S F4-2.5L DOHC (1998)
Axle Bearing: Service and Repair
DISASSEMBLY
1. Using Special Tool (ST)1, support housing and hub securely.
2. Attach ST2 to housing and drive hub out.
ST1 927080000 HUB STAND
ST2 927060000 HUB REMOVER
If inner bearing race remains in the hub, remove it with a suitable tool (commercially available).
CAUTION:
-
Be careful not to scratch polished area of hub.
-
Be sure to install inner race on the side of outer race from which it was removed.
3. Remove disc cover from housing.
4. Using a standard screwdriver, remove outer and inner oil seals.
CAUTION: Do not use old oil seals.
