Impreza F4-2.5L (2008)
BACK-UP LIGHT SWITCH & NEUTRAL POSITION SWITCH
1) Install the back-up light switch & neutral position switch with the harness.
2) Connect the connectors of back-up light switch & neutral position switch.
3) Install the air intake chamber and intake boot. (Non-turbo model)
4) Install the intercooler. (Turbo model)
5) Connect the battery ground cable to the battery.
INSPECTION
BACK-UP LIGHT SWITCH
Check the back-up light switch.
NEUTRAL POSITION SWITCH
1) Turn the ignition switch to OFF.
2) Disconnect the connector of neutral position switch.
3) Measure the resistance between neutral position switch terminals.
^
Non-turbo model
^
Turbo model
4) Replace faulty parts.
