Impreza F4-2.5L (2008)
3) Apply proper amount of liquid gasket to the entire oil pan mating surface.
4) Fill the 3 locations of the transmission case excluding the bolt holes with an ample amount of liquid gasket.
5) Install the oil pan by equally tightening the bolts.
Tightening torque: 5 N-m (0.5 kgf-m, 3.6 ft-lb)
6) Install the front vehicle speed sensor and torque converter turbine speed sensor.
Tightening torque: 7 N-m (0.7 kgf-m, 5.1 ft-lb)
7) Connect the connector to the rear vehicle speed sensor.
8) Install the ATF inlet and outlet pipes.
NOTE:
Use a new copper washer.
