subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Valve Body, A/T > < Transmission Temperature Sensor/Switch, A/T|Locations|Page 2927
Page 4
background image

5) Apply a plenty amount of liquid gasket to three holes other than screw holes on transmission case.

Liquid gasket: Three Bond 1217B (Part No. K0877YA020)

6) Install the oil pan.

Tightening torque: 5 Nm (0.50 kgf-m, 3.6 ft. lbs.) 

7) Fill ATF up to the middle of the "COLD" side on level gauge by using the gauge hole.
8) Check the ATF level.

ATF TEMPERATURE SENSOR 

When installing the ATF temperature sensor, refer to Front Vehicle Speed Sensor.

Valve Body, A/T > < Transmission Temperature Sensor/Switch, A/T|Locations|Page 2927