Impreza 2.5 RS Coupe F4-2.5L SOHC (2000)
-
Electrical connectors (for stop light switch, etc.)
6) Remove clevis pin which secures lever to push rod.
7) Remove nut which secures clutch master cylinder.
8) Remove steering assembly.
9) Remove bolts and nuts which secure brake and clutch pedals, and remove pedal assembly.
INSPECTION
BRAKE AND CLUTCH PEDALS
Move brake and clutch pedal pads in the lateral direction with a force of approximately 10 N (1 kg, 2 lbs.) to ensure pedal deflection is in specified
range.
CAUTION: If excessive deflection is noted, replace bushings with new ones.
Deflection of brake and clutch pedal:
Service limit: 5.0 mm (0.197 inch) or less
ACCELERATOR PEDAL
Lightly move pedal pad in lateral the direction to ensure pedal deflection is in specified range.
CAUTION: If excessive deflection is noted, replace bushing and clip with new ones.
Deflection of accelerator pedal:
Service limit: 5.0 mm (0.197 inch) or less
STOP LIGHT SWITCH
