subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shift Linkage, M/T|Description and Operation|Page 3269 > < Shift Linkage, M/T|Description and Operation|Page 3267
Page 3
background image

5. Remove O-ring, then disconnect bush (Stay rear).

6. Draw out spring pin, then remove bush (Shift lever) from lever.

C: INSPECTION

Check each parts (Bush, cushion, spacer, boot, stay and rod etc.) for deformation, damage and wear. Repair or replace any defective parts. Determine
defective parts by comparing with new parts.

D: ASSEMBLY

1. Clean all parts before assembly. 

Shift Linkage, M/T|Description and Operation|Page 3269 > < Shift Linkage, M/T|Description and Operation|Page 3267