Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
Trunk / Liftgate Latch: Service and Repair
Trunk Lid Lock Assembly
REMOVAL
1. Remove rod of lock assembly from rod holder of key lock assembly.
2. Remove bolts which hold lock assembly and remove lock assembly.
NOTE:
-
Always remove rear skirt trim panel beforehand, if so equipped.
-
Be careful not to bend opener cable.
3. Remove clip and detach key cylinder from trunk lid.
INSTALLATION
Install in the reverse order of removal.
NOTE: Apply grease to sliding surfaces of lock assembly and striker.
