Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
7. Check the pedal stroke. While the engine is idling, depress the brake pedal with a 490 N (50 kg, 110 lbs.) load and measure the distance between
the brake pedal and steering wheel. With the brake pedal released, measure the distance between the pedal and steering wheel again. The
difference between the two measurements must be more than specified.
1. Models without ABS
If the distance is more than specifications, there is a possibility that air is in the brake line. Bleed air from the brake line.
2. Models with ABS
If the distance is more than specifications, there is a possibility air is in the inside of the hydraulic unit. Therefore, air must be bled from the
inside of the hydraulic unit to the brake pipes in accordance with the bleeding sequence control.
8. Add brake fluid to the required level (MAX. level) of reserve tank.
9. As a final step, test run the vehicle at low speed and apply brakes relatively hard 2 to 3 times to ensure that brakes provide normal braking action
on all four wheels without dragging and uneven braking.
