Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
7. Confirm that the tightening angle of the crankshaft pulley bolt is 65 degrees or more. If not, conduct the following procedures (1) through (4).
1. Replace the crankshaft pulley bolts and clean them.
Crankshaft pulley bolt: 12369AA011
2. Clean the crankshaft thread using an air gun.
3. Tighten the bolts temporarily with tightening torque of 44 Nm 4.5 kgf-m, 33 ft. lbs.).
4. Tighten the crankshaft pulley bolts keeping them in an angle between 65 degrees and 75 degrees.
CAUTION: Conduct the tightening procedures by confirming the turning angle of the crankshaft pulley bolt referring to the gauge indicated
on the belt cover.
8. Install A/C belt tensioner. (With A/C model)
9. Install A/C belt. (With A/C model)
