Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
4. Tighten bolts which install oil pan onto engine block.
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
5. Lower engine onto front crossmember.
6. Tighten nuts which install front cushion rubber onto front crossmember.
Tightening torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.)
7. Install front exhaust pipe and center exhaust pipe assembly.
CAUTION: Always use the new gaskets.
8. Connect connector to rear oxygen sensor.
9. Install under cover.
10. Lower the vehicle.
CAUTION: At this time, lower lifting device and release steel cables.