Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
-
If any damage or open is found on the SRS airbag system wire harness, do not attempt to repair using soldering, etc. Be sure to replace the faulty
harness with a new genuine part.
-
Install the wire harness securely with the specified clips so as to avoid interference or jamming with other parts.
-
Before connecting the airbag system to ground, make sure that the grounding terminal is free from paint and contamination.
-
Do not allow water or oil to come in contact with the connector terminals. Do not touch the connector terminals.
-
When connecting or disconnecting airbag connector, make sure ignition switch is OFF.
