subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Level Sensor > < Service Manual - Multiple Systems Updates/Corrections|Page 2029
Page 2
background image

5. Remove nuts which hold ECM to bracket.

6. Remove clip from bracket.

7. Disconnect ECM connectors.

8. Take out ECM.

INSTALLATION

Install in the reverse order of removal.

CAUTION:  When replacing ECM, be careful not to use the wrong spec. ECM to avoid any damage to the fuel injection system.

Fuel Level Sensor > < Service Manual - Multiple Systems Updates/Corrections|Page 2029