subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Temperature Sensor|Service and Repair|Page 1835 > < Fuel Temperature Sensor|Service and Repair
Page 2
background image

7. Remove nuts which install fuel pump assembly onto fuel tank.

8. Take off fuel pump assembly from fuel tank.

9. Disconnect connector from fuel pump bracket.

10. Remove main fuel level sensor from fuel pump assembly. <Ref. to REMOVAL, Main Fuel Level Sensor.>

NOTE:  Fuel temperature sensor is a unit with fuel pump. If replacing it, replace as a fuel pump.

INSTALLATION

CAUTION:  Leave fuel filler cap open when tightening nuts, to prevent fuel from flowing out through fuel delivery and return pipes. Close fuel filler
cap after tightening nuts.

Install in the reverse order of removal. Do the following:

1. Always use new gaskets.

Fuel Temperature Sensor|Service and Repair|Page 1835 > < Fuel Temperature Sensor|Service and Repair