Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
2. Connect harness connectors at 8 places.
Connect connectors of same color, and secure connectors to valve body using clips.
3. Apply proper amount of liquid gasket (THREE BOND Part No. 1217B) to the entire oil pan mating surface.
4. Install oil pan.
Tightening torque: 4.9 Nm (0.50 kgf-m, 3.6 ft. lbs.)
5. Fill ATF up to the middle of the "COLD" side on level gauge by using the gauge hole.
Recommended fluid: Dexron IIE or Dexron III type automatic transmission fluid
Fluid capacity:
2200 cc model; 8.4 - 8.7L (8.9 - 9.2 US qt.,7.4 - 7.7 Imp qt.)
2500 cc model; 9.3 - 9.6L (9.8 - 10.1 US qt. 8.2 - 8.4 Imp qt.)
6. Run the vehicle until the ATF temperature rises from 60 to 80°C (140 to 176°F) and check the ATF level of the "HOT" side on level gauge.
