Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
![background image](/subaru/impreza_2.5_rs_coupe_awd/f4-2.5l_sohc/Page-701002.png)
9. Place transmission jack under transmission.
CAUTION:
^
Always support transmission case with a transmission jack.
^
On AT vehicle, make sure that the support plates of transmission jack don't touch the oil pan.
10. Remove the transmission rear crossmember bolts.
11. Lower the AT jack.
NOTE: Do not separate the AT jack and transmission.
12. Remove the oil cooler outlet pipe.
CAUTION: When removing outlet pipe, be careful not to lose balls and springs used with retaining screws.
13. Remove vehicle speed sensor 1, 2, and torque converter turbine speed sensor with harness assembly.
^
Vehicle speed sensor 2 and torque converter turbine speed sensor
^
Vehicle speed sensor 1