subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Airbag Warning Light Remains on|Page 4628 > < Disconnection and Connection|Page 4623
Page 1
background image

Malfunction Lamp / Indicator: Testing and Inspection
Airbag Warning Light Remains on

DIAGNOSIS:

-

Airbag warning light is faulty.

-

Airbag control module to airbag warning light circuit is shorted or open.

-

Grounding circuit is faulty.

-

Airbag control module is faulty.

-

(AB1) and (B31) are not connected properly.

-

(AB6) is not connected properly to airbag control module.

CAUTION:

-

Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the ground cable from the battery, and wait more than 20
seconds
 before starting to work.

-

Before replacing the airbag module, roll connector, control module, and sensor, reconnect each part and confirm that the warning light operates
properly.

-

When inspecting the airbag main harness, disconnect the airbag module connector of the driver and passenger seats for safety reasons.

Step 1 - 4

Airbag Warning Light Remains on|Page 4628 > < Disconnection and Connection|Page 4623