subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Oxygen Sensor > < Knock Sensor|Locations|Page 386
Page 2
background image

1. Install knock sensor to cylinder block.

Tightening torque: 23.5 N.m 2.4 kgf-m, 17.4 ft-lb)

NOTE:  The extraction area of the knock sensor cord must be positioned at a 45° angle relative to the engine rear.

2. Connect knock sensor connector.

3. Install air cleaner case.

4. Connect battery ground cable.

Oxygen Sensor > < Knock Sensor|Locations|Page 386