subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Service Manual Updates - Multiple Systems|Page 3021 > < Service Manual Updates - Multiple Systems|Page 3019
Page 2
background image

8. Move range select lever to parking position (left side).

9. Remove inhibitor switch from transmission.

D: INSTALLATION 

1. Install inhibitor switch to transmission case.
2. Move range select lever to neutral position.

3. Using ST, tighten bolts of inhibitor switch.

ST 499267300 STOPPER PIN

4. Install select cable to range select lever.

Service Manual Updates - Multiple Systems|Page 3021 > < Service Manual Updates - Multiple Systems|Page 3019