subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shifter A/T|Removal and Installation|Page 3063 > < Shifter A/T|Removal and Installation|Page 3061
Page 3
background image

12. Check select lever operation.

WARNING:  Stop the engine while checking operation of select lever.

1. Check that select lever does not move from "N" to "R" without pushing the button.
2. Check that select lever does not move from "R" to "P" without pushing the button.
3. Check that select lever does not move from "P" to "R" without pushing the button.
4. Check that select lever does not move from "3" to "2" without pushing the button.

13. Check shift-lock system.

1. Ensure ignition switch rotates from "ACC" to "LOCK" when the select lever is set at "P". Also check that ignition key can be removed only

from the "LOCK" position.

2. Ensure select lever moves from "P" to any other position when the brake pedal is depressed with ignition key set at "ON" or "START".

Shifter A/T|Removal and Installation|Page 3063 > < Shifter A/T|Removal and Installation|Page 3061