subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Transmission Speed Sensor, A/T > < Service Manual Updates - Multiple Systems|Page 3104
Page 3
background image

5. Install plate assembly to transmission.

Tightening torque: 
T: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.) 

6. Install snap pin to range select lever.
7. Install front exhaust pipe and center exhaust pipe.

8. Connect inhibitor switch connector.
9. Install air cleaner case and air intake duct.

Transmission Speed Sensor, A/T > < Service Manual Updates - Multiple Systems|Page 3104