subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shifter M/T|Removal and Installation|Page 3525 > < Shifter M/T|Removal and Installation|Page 3523
Page 1
background image

Shifter M/T: Service and Repair
Disassembly and Assembly

C: DISASSEMBLY 

1. Disconnect locking wire.

2. Remove rod from lever.

3. Remove snap ring, then disconnect lever from stay.
4. Remove boot from gearshift lever.

5. Remove O-ring, then disconnect bush (Stay rear).

Shifter M/T|Removal and Installation|Page 3525 > < Shifter M/T|Removal and Installation|Page 3523