subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Service Manual - Multiple Systems Updates/Corrections|Page 3718 > < Service Manual - Multiple Systems Updates/Corrections|Page 3716
Page 1
background image

Control Module: Service and Repair

A: REMOVAL 

1. Disconnect battery ground terminal.

2. Remove lower cover and then disconnect connector.
3. Disconnect connectors form TCM.

4. Remove transmission control module.

B: INSTALLATION 

1. Install TCM to pedal bracket.

Tightening torque: 7.4 Nm (0.75 kgf-m, 5.4 ft. lbs.) 

2. Connect connectors to TCM.

Service Manual - Multiple Systems Updates/Corrections|Page 3718 > < Service Manual - Multiple Systems Updates/Corrections|Page 3716