Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
Connect connectors of same color, and secure connectors to valve body sing clips.
3. Apply proper amount of liquid gasket (THREE BOND Part No. 1217B) to the entire oil pan mating surface.
4. Install the oil pan.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
5. Install the vehicle speed sensor 1 and 2, and also the torque converter turbine speed sensor, and then fasten the harness.
Tightening torque: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)
6. Install oil cooler outlet pipe.
7. Install transmission rear crossmember bolts.
Tightening torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.)
8. Install shield cover.
9. Install propeller shaft.
10. Install the transmission connector to the stay.
