Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
CAUTION:
- If primer has dropped on body finish, it is hard to wipe it off. So protect with masking.
- Primer must not project from black frame of glass.
- After applying primer, let it dry spontaneously for about 10 minutes.
5. Application of adhesive:
1. Cut nozzle tip as shown in figure.
2. Open cartridge and put it into a gun with nozzle attached.
3. Apply adhesive uniformly to all sides of adhesion surface while operating gun along glass end face.
6. Installation of glass:
1. Hold glass with rubber suction cups.
2. Mount glass on body with matching pin aligned.
3. Stick them fast by pressing all sides lightly.
7. Water leakage test:
After installing glass, test for water leakage after about one hour.
CAUTION:
-
Move vehicle slowly.
-
When opening and closing door, lower door glass and move door gently.
-
Do not squirt strong hose stream on vehicle.
8. Spontaneous drying:
After completing all operations, leave vehicle alone for 24 hours.
CAUTION: When delivering vehicle to user, tell him or her that vehicle should not be subjected to heavy shocks for at least three days.
