Impreza 2.5 RS Coupe AWD F4-2.5L SOHC (2001)
1. Remove adhesive overflowing from outside of glass until it becomes level with outer height of glass. Then, add adhesive to portions that need
it, and clean with alcohol or white gasoline.
2. Firstly, press-fit front window molding upper and lastly, roof molding.
CAUTION: Do not open and close door after moldings have been installed. When opening and closing door for unavoidable reason, lower
door glass and gently move door.
10. Water leakage test:
Test for water leakage about one hour after installation.
CAUTION:
-
Move vehicle very gently.
-
Do not squirt strong hose stream on vehicle.
11. Spontaneous drying:
After completing all operations, leave vehicle alone for 24 hours.
CAUTION: When delivering vehicle to user, tell him that vehicle should not be subjected to heavy shocks for at least three days.
12. Install cowl panel and wiper arm.
