Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Alarm Module: Service and Repair
Security Control Module
REMOVAL
1. Disconnect the ground terminal from battery.
2. Remove the console cover.
3. Disconnect the connector from the security control module.
4. Remove bolt (A) and loosen bolt (B).
NOTE: Loosen bolt (B) without completely removing it.
5. Remove the security control module.
INSTALLATION
Install in the reverse order of removal.
NOTE: To install the security control module, tighten the bolts securely so that the bolts do not come loose.
