Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Front Door Window Glass: Adjustments
NOTE: Before adjustment, ensure that all adjusting bolts of stabilizer, upper stopper, and sash are loose and door glass is raised so that it is in contact
with weatherstrip.
1. Temporarily tighten one adjusting bolt on one side of rear sash at the midpoint of slotted hole in the inner panel.
2. Temporarily tighten the regulator B-channel in a position at the top of slotted hole.
3. Lower the door glass 10 - 15 mm (0.39 - 0.59 in) from fully closed position. While applying outward pressure of 45.0 ± 4.9 N (4.6 ± 0.5 kg, 11.0
± 1.1 lb) (F) to upper edge of glass above midpoint of two outer stabilizers, press the inner stabilizer at pressure of 10 ± 5 N (1.0 ± 0.5 kg, 0.2 ±
0.1 lb) to the glass, then secure it.
4. For adjustment of clearance between front glass and center pillar cover, loosen the nuts (A), and move the glass sash back and forward until
clearance becomes the value shown.
5. For adjustment of upper and lower ends of center pillar, loosen the adjusting nut (A) of B-channel (B).